Malfunctions and other unplanned and unusual event may not be totally eliminated, but it can surely be minimized.
Listed below are some of the malfunctions and unplanned events when using the different tools in completing a job requirement:
- When using a driving tool, screws may slip the tip of the screw driver. This happens when the screw driver is not properly aligned with drive of the screw’s head. This can be minimized by making sure that the tip of the screw driver is well secured in the drive of the screw’s head. Using a screw driver with a magnetized tip can also help minimize this type of malfunction.
- Small objects tend to fall down when being held by a gripping tool like pliers. This usually happens when the jaws of the pliers are blunt, thus making it hard to hold on things. This can be prevented by making sure that gripping tools have well maintained jaws that can grasp objects properly.
Listed below are some of the malfunctions and unplanned events when using the different tools in completing a job requirement:
- The use of striking tools also imposes a great threat if there will be a malfunction.
- Common hazards are heads separating away from the handle.
- This could cause severe injuries to anyone.
- To avoid this type of accident, the handle of a striking tool must be tightly attached to its head.
- Mishaps in using cutting tools is also dangerous.
- Malfunctions may arise from slippage of the material to be cut.
- This may also happen if a cutting tool is not sharp enough.
- These unplanned events will cause laceration and wounds to the user.
- To avoid this, cutting tools must always be kept sharp. Power tools also impose danger during mishaps.
- Common problems are electrical short circuiting or mechanical problems. Malfunctioning power tools may cause electrocution and even decapitation of the limbs.
- These accidents can be avoided by making sure that all power tools are well maintained and are in fit operating condition.
- Diagnostic tools may not impose a threat to the well-being of a worker but inaccurate reading may compromise the completion of a job requirement.
- Inaccurate reading may occur if a diagnostic tool is not properly calibrated. To avoid this, a regular calibration to all diagnostic tools must be done.
THINGS TO REMEMBER:
There is certainly no absolute way to avoid any unforeseen malfunctions.The only way to minimize them is to have the appropriate knowledge in using the different tools.Proper inspection and assessment of tools must also be practiced to ensure the safety of the worker and the accurate completion of a job requirement.Having a first aid kit in the work area is also necessary so that quick response and cure can be applied in case of any injuries.
Source: https://school.quipper.com/en-PH/index.html
Walang komento:
Mag-post ng isang Komento